Trinium 3

The largest luminaire in the series, Trinium 3 offers the highest fixture efficacy and the most versatility of the three. Maintaining the distinctive styling of the series, Trinium 3 adds the option of integral drivers and dual LED rows in a single housing.
Light Tunable White
Color
RAL custom finishes available
Mounting
Variations
Integrated Sensor
1 Hr Customization, Customize it, We will contact you within 1 hour

Trinium 3 Specifications

  • Round High-Voltage Power Cord
  • Standard 0-10V dimming to 1%
  • Wattage and lumen package options @ 4000K:
    • 4W / 400Lm/LF
    • 6W / 605Lm/LF
    • 8W / 795Lm/LF
    • 10W / 995Lm/LF
    • 12W / 1160Lm/LF
    • 19.5W / 1995Lm/LF
  • Efficacy up to 101Lm/W
  • CCT range: 2700K, 3000K, 3500K, 4000K and 5000K
  • Integral Driver
  • Choose from leading sensors:
    • Enlighted
    • Lutron Vive
    • nLight
    • WaveLinx
  • Multiple mounting options:
    • Cable Suspended
    • Cable Suspended Rotational
    • Rotational Arm Mount
  • Light Distribution:
    • Direct, Indirect, 360° Rotational
  • Dimensions: 3-7/8″ (w) x 3-1/2″ Triangular Profile
Trinium 3 Line Drawing

Optional Integrated Sensor

This luminaire is available with your choice of integrated wireless sensors from the leading sensor control companies: Enlighted, Lutron Vive, nLight and Wavelinx.

Built directly into your luminaire, integrated sensors provide an all-in-one solution, giving you one less thing to worry about on the job site. Installation has never been easier.

Use our Sensor & Daylight Wiring worksheet to specify.

Optional Integrated Sensor

Optional Integrated Sensor

This luminaire is available with your choice of integrated wireless sensors from the leading sensor control companies: Enlighted, Lutron Vive, nLight and Wavelinx.

Built directly into your luminaire, integrated sensors provide an all-in-one solution, giving you one less thing to worry about on the job site. Installation has never been easier.

Use our Sensor & Daylight Wiring worksheet to specify.

SENSOR
MFR.
SYSTEM
FAMILY
MFR. SENSOR
PART NO.
SENSOR
SPEC SHEET
LutronViveDFCSJ-OEM-OCCLutron Spec Sheet
AcuityNlight AirRES7Acuity Spec Sheet
Cooper LightingWavelinxOEM-WAACooper Lighting
Spec Sheet
EnlightedEnlightedFS-D22Enlighted Spec Sheet
Optional Integrated Sensor

Optional Integrated Sensor

This luminaire is available with your choice of integrated wireless sensors from the leading sensor control companies: Enlighted, Lutron Vive, nLight and Wavelinx.

Built directly into your luminaire, integrated sensors provide an all-in-one solution, giving you one less thing to worry about on the job site. Installation has never been easier.

Use our Sensor & Daylight Wiring worksheet to specify.

Optional Integrated Sensor
SENSOR
MFR.
SYSTEM
FAMILY
MFR. SENSOR
PART NO.
SENSOR
SPEC SHEET
LutronViveDFCSJ-OEM-OCCLutron Spec Sheet
AcuityNlight AirRES7Acuity Spec Sheet
Cooper LightingWavelinxOEM-WAACooper Lighting
Spec Sheet
EnlightedEnlightedFS-D22Enlighted Spec Sheet

Mounting Options

Cable Suspended

Cable Suspended

3/64” aircraft cable suspension system. Fixtures can be static down-lights: Direct, static up-lights: Indirect, or Rotational (see CSR below). Standard and custom power cord finishes, sleeve options, and canopy colors offer options to match almost any space. Stainless steel cables come in various lenghts (4’ is standard) and are field adjustable.Oxygen

Cable Suspended Rotational

Cable Suspended Rotational

Using a similar setup to the Cable Suspended system above, the Cable Suspended - Rotational system has 360 degree rotational capcity with mechanical fasteners to lock fixtures in place if desired. This system offers incredible flexibility, light direction control, and a dynamic aesthetic.

Rotational Arm Mount

Rotational Arm Mount

This system uses 1/2” to 5/8” diameter aluminum arms and subtle details in combination with 360° rotational capacity to create some of the most versatile linear fixtures in the architectural market. Standard mounting uses 3-O mud rings (supplied by others) or a 1” optional trim ring for furniture mounted applications. Engineered with no visible fasteners, smooth rotation, and mechanical locking, the RAM system reveals an impressive aesthetic with exceptional versatility.

Canopy Options

Standard (44 Canopy Option)

44 Canopies have two standard options to suit various environment aesthetics. The standard cable suspension system has two 4 – 1/4” canopies with the options of Satin White (SW) or Matte Black (MB) Finishes. These Canopies can also have a Machine Finish for a more striking look. This option does carry a higher cost than standard canopies, but also has an impressive appearance.

*Contact your rep for other canopy options.

Custom

Custom canopies options are available and can look as spectacular in certain applications. Contact the factory with all custom requests or with any question.

Custom

Zero Canopy Options

Zero Canopy is Lumium’s exclusive suspension mounting method to eliminate all visual distractions on the ceiling plane. When used with non-powered aircraft suspension cable, or with our Powered Suspension System (PSS) and remote driver, Lumium’s Zero Canopy option eliminates the need for a thick canopy cover by ingeniously hiding the height-adjustment gripper and electrical connections behind a thin 2-1/4” magnetized access panel. Paint the panel to match the ceiling to create a simple, elegant luminaire suspension system with no visible hardware. Attaches to a standard 4” j-box. Available for hard top mud-in ceilings up to 3/4” thick, as well as suspended ceilings from 1/4” – 1-1/2” thick.

ACT (2ACT)

Zero Canopy ACT
ACT Canopy Line Drawing

Lumium’s Zero Canopy option for suspended and acoustic ceilings is a clever solution for removing distracting visible mounting hardware from the ceiling plane. The 2ACT ceiling tile version includes a thin 2-1/411 magnetized access panel, which hides any electrical connections and included height-adjustment gripper. A threaded piston adjusts to accommodate various installation applications and ceiling thicknesses, even thin metal substrates. Conceal the access panel by painting-to-match the rest of the ceiling, or add a custom finish for a pop of color. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2ACT for line voltage power drop locations.

MUD-IN (2MIC)

Zero Canopy MUDIN
MUD-IN Canopy Line Drawing

Lumium’s Zero Canopy option for mud-in ceilings is an ingenious method for removing all visible hardware from the ceiling plane. The 2MIC mud-in version includes a built-in 1/2 11 flange with a flush 2-1/411 magnetized access panel which hides any electrical connections and included height-adjustment gripper. Conceal the access panel by painting-to-match the rest of the ceiling, and eliminates all visual distractions from suspension hardware. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2MIC for line voltage power drop locations.

ACT (2ACT)

Zero Canopy ACT
ACT Canopy Line Drawing

Lumium’s Zero Canopy option for suspended and acoustic ceilings is a clever solution for removing distracting visible mounting hardware from the ceiling plane. The 2ACT ceiling tile version includes a thin 2-1/411 magnetized access panel, which hides any electrical connections and included height-adjustment gripper. A threaded piston adjusts to accommodate various installation applications and ceiling thicknesses, even thin metal substrates. Conceal the access panel by painting-to-match the rest of the ceiling, or add a custom finish for a pop of color. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2ACT for line voltage power drop locations.

MUD-IN (2MIC)

Zero Canopy MUDIN
MUD-IN Canopy Line Drawing

Lumium’s Zero Canopy option for mud-in ceilings is an ingenious method for removing all visible hardware from the ceiling plane. The 2MIC mud-in version includes a built-in 1/2 11 flange with a flush 2-1/411 magnetized access panel which hides any electrical connections and included height-adjustment gripper. Conceal the access panel by painting-to-match the rest of the ceiling, and eliminates all visual distractions from suspension hardware. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2MIC for line voltage power drop locations.