U-Series

Proton 1

With numerous mounting and lamping options, this minimalistic fixture has a unique form factor that lends itself to a strong visual impact. The sleek form is enhanced by the thin aircraft cables through which power is routed.
Color
RAL custom finishes available
1 Hr Customization, Customize it, We will contact you within 1 hour

Proton 1 Specifications

  • Powered Suspension System (PSS)
  • Standard 0-10V dimming to 1%
  • Wattage and lumen package options @ 3500K:
    • 4W / 375 Lm/LF
    • 6W / 570 Lm/LF
    • 8W / 745 Lm/LF
    • 10W / 935 Lm/LF
    • 12W / 1090 Lm/LF
  • Efficacy up to 95 Lm/W
  • CCT range: 2700K, 3000K, 3500K, 4000K and 5000K
  • 2-step MacAdam Ellipse binning
  • Remote Driver
  • Multiple mounting options:
    • Cable Suspended
    • Asymmetric Mount
    • Surface Mount
    • End Surface Mount
  • Light Distribution:
    • Direct, Indirect
  • Dimensions: 2″ (w) x 5/8″ (h)
Proton 1 Line Drawing

Proton 1 Downloads

Mounting Options

Asymmetric Mount

Asymmetric Mount

Lumium has designed a unique mounting configuration wherein the fixture is balanced from an off-center mounting point, creating a balance between dynamic tension and minimalistic beauty. Adjustable counterweighting enables the fixture to be optimized to the desired angle, and creates a sense of visual intrigue. For applications in which lateral stability is required, such as environments with air conditioning currents, a rigid tube mount is available. This mounting option also allows an integral driver option on the “1” series fixtures with standard LED.

Cable Suspended

Cable Suspended

3/64” aircraft cable suspension system. Fixtures can be static down-lights: Direct, static up-lights: Indirect, or Rotational (see CSR below). Standard and custom power cord finishes, sleeve options, and canopy colors offer options to match almost any space. Stainless steel cables come in various lenghts (4’ is standard) and are field adjustable.Oxygen

Surface Mount

Surface Mount

(Ceiling Mount or Wall Mount - CM or WM): Fixtures mount directly to the surface. Ceiling or Wall Mount specification denotes the power feed hole location(s). Optional stand-offs allow for fixtures to be mounted from 1/2” to 12” as well as custom lengths if needed.

End Surface Mount

End Surface Mount

Wall or Ceiling Mount. Fixtures are mounted from their ends onto the wall using standard 3-O rings. An aircraft cable suspension system will be issued if the fixtures are longer than 2 feet, if needed.

Canopy Options

Standard (44 Canopy Option)

44 Canopies have two standard options to suit various environment aesthetics. The standard cable suspension system has two 4 – 1/4” canopies with the options of Satin White (SW) or Matte Black (MB) Finishes. These Canopies can also have a Machine Finish for a more striking look. This option does carry a higher cost than standard canopies, but also has an impressive appearance.

Standard (44 Canopy Option)

Custom

Custom canopies options are available and can look as spectacular in certain applications. Contact the factory with all custom requests or with any question.

Custom

Powered Suspension System

Lumium’s Powered Suspension System (PSS) eliminates traditional thick power cables, creating a clean and uncluttered aesthetic that compliments smaller sized luminaire profiles.

Low Voltage class 2 power is carried from remote drivers through a thin 1/8” dual-conductor coaxial suspension cable. The minimal design opens up a new element of creative freedom.

Powered Suspension System

Zero Canopy Options

Zero Canopy is Lumium’s exclusive suspension mounting method to eliminate all visual distractions on the ceiling plane. When used with non-powered aircraft suspension cable, or with our Powered Suspension System (PSS) and remote driver, Lumium’s Zero Canopy option eliminates the need for a thick canopy cover by ingeniously hiding the height-adjustment gripper and electrical connections behind a thin 2-1/4” magnetized access panel. Paint the panel to match the ceiling to create a simple, elegant luminaire suspension system with no visible hardware. Attaches to a standard 4” j-box. Available for hard top mud-in ceilings up to 3/4” thick, as well as suspended ceilings from 1/4” – 1-1/2” thick.

ACT (2ACT)

Zero Canopy ACT
ACT Canopy Line Drawing

Lumium’s Zero Canopy option for suspended and acoustic ceilings is a clever solution for removing distracting visible mounting hardware from the ceiling plane. The 2ACT ceiling tile version includes a thin 2-1/411 magnetized access panel, which hides any electrical connections and included height-adjustment gripper. A threaded piston adjusts to accommodate various installation applications and ceiling thicknesses, even thin metal substrates. Conceal the access panel by painting-to-match the rest of the ceiling, or add a custom finish for a pop of color. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2ACT for line voltage power drop locations.

MUD-IN (2MIC)

Zero Canopy MUDIN
MUD-IN Canopy Line Drawing

Lumium’s Zero Canopy option for mud-in ceilings is an ingenious method for removing all visible hardware from the ceiling plane. The 2MIC mud-in version includes a built-in 1/2 11 flange with a flush 2-1/411 magnetized access panel which hides any electrical connections and included height-adjustment gripper. Conceal the access panel by painting-to-match the rest of the ceiling, and eliminates all visual distractions from suspension hardware. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2MIC for line voltage power drop locations.

T-BAR (2TBC) PSS POWER FEED

Zero Canopy T-BAR

Lumium’s Zero Canopy option for attachment to suspended T-bar grid systems provides a minimalist solution to remove distracting mounting hardware from the ceiling plane. The 2TBC version includes a precisely machines 1-5/8” diameter x 1-5/S” high connection clip for easy attachment to standard T-bar grid cross members. Not for use at T-bar intersections. A rugged gripper for mounting height adjustments extends an additional ¼” below the clip. Available for standard aircraft cable or Lumium’s PSS powered suspension cable system and remote drivers only. Do not use 2TBC for line voltage power drop locations.

ACT (2ACT)

Zero Canopy ACT
ACT Canopy Line Drawing

Lumium’s Zero Canopy option for suspended and acoustic ceilings is a clever solution for removing distracting visible mounting hardware from the ceiling plane. The 2ACT ceiling tile version includes a thin 2-1/411 magnetized access panel, which hides any electrical connections and included height-adjustment gripper. A threaded piston adjusts to accommodate various installation applications and ceiling thicknesses, even thin metal substrates. Conceal the access panel by painting-to-match the rest of the ceiling, or add a custom finish for a pop of color. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2ACT for line voltage power drop locations.

MUD-IN (2MIC)

Zero Canopy MUDIN
MUD-IN Canopy Line Drawing

Lumium’s Zero Canopy option for mud-in ceilings is an ingenious method for removing all visible hardware from the ceiling plane. The 2MIC mud-in version includes a built-in 1/2 11 flange with a flush 2-1/411 magnetized access panel which hides any electrical connections and included height-adjustment gripper. Conceal the access panel by painting-to-match the rest of the ceiling, and eliminates all visual distractions from suspension hardware. Tooless entry. Attaches to a standard 4” j-box. Specify access panel finish. Accepts standard aircraft cable or PSS powered suspension cable system only. Do not use 2MIC for line voltage power drop locations.

T-BAR (2TBC) PSS POWER FEED

Zero Canopy T-BAR

Lumium’s Zero Canopy option for attachment to suspended T-bar grid systems provides a minimalist solution to remove distracting mounting hardware from the ceiling plane. The 2TBC version includes a precisely machines 1-5/8” diameter x 1-5/S” high connection clip for easy attachment to standard T-bar grid cross members. Not for use at T-bar intersections. A rugged gripper for mounting height adjustments extends an additional ¼” below the clip. Available for standard aircraft cable or Lumium’s PSS powered suspension cable system and remote drivers only. Do not use 2TBC for line voltage power drop locations.